XBOX Systemfehler E106
Situation
XBOX gestartet; Fernseher angemacht; Kein Signal; XBOX nach nicht mal einer Minute von alleine wieder ausgegangen; Verdammt.
Sobald man den USB-Stick zum Offline-Systemupdate einsteckt wird das Menu rechts oben anwaehlbar (siehe unten).
Recherche
Die meisten Suchergebnisse nach: "XBOX schaltet sich wieder aus" melden eine Ueberhitzung (durch Verschmutzung) als Ursache.
Oeffnen
Also die Box mal aufmachen, um einen Blick auf den CPU-Kuehler werfen zu koennen.
Was helfen sollte, dass man die genaue Position der Schnapper kennt. Am Brechen des Siegels kommt an eigentlich nicht vorbei. Mit viel Geduld und Vorsicht bekommt man es vielleicht aufgehebelt, ohne den Aufkleber zu zerstoeren.
Was bestimmt hilft (Tipp vom Tibb;-) sind die Metallhebel. Das sind alte Slotbleche eines etwas aelteren PC-Gehaeuses, aus der Zeit als PCs noch fuer die Ewigkeit gebaut wurden. Ich wuerde am Siegel anfangen und dann mit dem Schnapper direkt daneben um die Ecke anfangen. Dann von hinten immer rechts links abwechselnd.
Die Festplatte ist der Uebeltaeter.
Nach einer Weile hat sich die Platte beruhigt und man kann ueber den SATA-Adapter zugreifen. Viel mehr aber auch nicht.
worker:~ # smartctl -a /dev/sdd
smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150500.55.80-default] (SUSE RPM)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST500VT000-1DK142
Serial Number: WBY5A0EG
LU WWN Device Id: 5 000c50 09d8d8e55
Firmware Version: 0001MBC1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 12 21:12:05 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 99) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 131624728
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1023
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 4714164
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 267 (19 220 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 877
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 075 058 045 Old_age Always - 25 (Min/Max 25/25)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 180
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1052
194 Temperature_Celsius 0x0022 025 042 000 Old_age Always - 25 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 100 000 Old_age Offline - 264 (86 229 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 763275057
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1045855649
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
worker:~ # fdisk /dev/sdd
Welcome to fdisk (util-linux 2.37.4).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdd: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk model: ASM1156-PM
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: A2344BDB-D6DE-4766-9EB5-4109A12228E5
Device Start End Sectors Size Type
/dev/sdd1 2048 85985279 85983232 41G Microsoft basic data
/dev/sdd2 85985280 851445759 765460480 365G Microsoft basic data
/dev/sdd3 851445760 935331839 83886080 40G Microsoft basic data
/dev/sdd4 935331840 960497663 25165824 12G Microsoft basic data
/dev/sdd5 960497664 975177727 14680064 7G Microsoft basic data
Command (m for help):
Festplattentausch
So um die 20 Euro gibt's Ersatz.
Installation
Das ist auch recht einfach.
Diese Anleitung beschreibt alles.
Und wieder zurueck am Platz.
Und geht wieder!