Allgemeines
[1]
Cerbo GX – Venus OS 3.79
│
├── Brief / Kurzansicht
│
├── Overview / Übersicht
│ ├── Netz
│ ├── AC-Verbrauch
│ ├── Wechselrichter/Ladegerät
│ ├── Batterie
│ ├── PV
│ └── DC-System
│
└── Settings / Einstellungen
│
├── Devices / Geräte
│ │
│ ├── MultiPlus-II / VE.Bus System
│ │ ├── Status
│ │ ├── Schalter
│ │ │ ├── On
│ │ │ ├── Charger only
│ │ │ ├── Inverter only
│ │ │ └── Off
│ │ ├── AC Eingang
│ │ ├── AC Ausgang
│ │ ├── DC / Batterie
│ │ ├── Alarme
│ │ ├── Advanced / Erweitert
│ │ └── Geräteinformationen
│ │
│ ├── Pylontech battery
│ │ ├── SOC
│ │ ├── Batteriespannung
│ │ ├── Batteriestrom
│ │ ├── Leistung
│ │ ├── Temperatur
│ │ ├── State / Status
│ │ ├── Parameters
│ │ │ ├── CCL – Charge Current Limit
│ │ │ ├── DCL – Discharge Current Limit
│ │ │ └── CVL – Charge Voltage Limit
│ │ ├── Alarms
│ │ └── Device information
│ │
│ ├── SmartSolar MPPT [falls vorhanden]
│ ├── Grid meter [falls vorhanden]
│ └── weitere erkannte Geräte
│
├── General / Allgemein
│ │
│ ├── Firmware
│ │ ├── Firmware version
│ │ ├── Build date/time
│ │ ├── Image type
│ │ ├── Online updates
│ │ │ ├── Auto update
│ │ │ ├── Update feed
│ │ │ └── Check for updates
│ │ ├── Install firmware from SD/USB
│ │ └── Stored backup firmware
│ │
│ ├── Access & Security
│ │ ├── Access level
│ │ ├── Local network security profile
│ │ ├── Remote support
│ │ └── Remote support tunnel
│ │
│ ├── Display & Appearance
│ │ ├── Brightness
│ │ ├── Display off time
│ │ ├── GX display appearance
│ │ ├── Remote Console appearance
│ │ ├── Start page
│ │ ├── Brief page
│ │ ├── Data units
│ │ ├── Gauge ranges
│ │ ├── UI animations
│ │ └── User interface
│ │ ├── New UI
│ │ └── Classic UI
│ │
│ ├── Alarms & Feedback
│ ├── Language
│ ├── Date & Time
│ ├── Reboot
│ ├── Documentation
│ └── Support status
│
├── Connectivity / Konnektivität
│ │
│ ├── Ethernet
│ │ ├── Status
│ │ ├── IP-Adresse
│ │ ├── DHCP
│ │ ├── Gateway
│ │ └── DNS
│ │
│ ├── Wi-Fi
│ │ ├── Wi-Fi aktivieren
│ │ ├── Access Point
│ │ └── verfügbare WLANs
│ │
│ ├── Bluetooth
│ │
│ └── VE.Can
│ ├── CAN-bus profile
│ ├── Network status
│ └── Geräte
│
├── VRM
│ │
│ ├── VRM Portal
│ ├── Logging
│ ├── VRM Portal ID
│ ├── Connection status
│ ├── Log interval
│ └── Remote Console
│
├── Integrations
│ │
│ ├── Relays
│ │ ├── Relay 1
│ │ └── Relay 2
│ │
│ ├── Temperature sensors
│ ├── Tank sensors
│ ├── Digital inputs
│ ├── PV / Inverter integration
│ │
│ ├── MQTT Access
│ │ └── Enable / Disable
│ │
│ ├── Modbus TCP Server
│ │ ├── Enable
│ │ ├── Access permissions
│ │ └── Available services
│ │
│ └── Venus OS Large Features
│ ├── Signal K
│ └── Node-RED
│
└── System Setup
│
├── System name
│
├── AC System
│ ├── AC input 1
│ │ ├── Grid
│ │ ├── Generator
│ │ ├── Shore
│ │ └── Not available
│ ├── AC input 2
│ └── Position of AC loads
│
├── Battery
│ ├── Battery monitor
│ │ └── Pylontech battery
│ ├── Battery measurements
│ └── System SOC
│
├── ESS
│ │
│ ├── Mode
│ │ ├── Optimized
│ │ └── Keep batteries charged
│ │
│ ├── Minimum SOC
│ ├── Active SOC limit
│ ├── Grid setpoint
│ ├── Peak shaving
│ └── Feed-in / Einspeisung
│
└── DVCC
│
├── DVCC
│ └── ON / OFF
│
├── Limit charge current
│ ├── ON / OFF
│ └── Maximum charge current
│
├── SVS
│ └── Shared Voltage Sense
│
├── STS
│ └── Shared Temperature Sense
│
├── SCS
│ └── Shared Current Sense
│
└── Controlled battery
└── Pylontech BMS
├── CVL
├── CCL
└── DCL